New Tools From Alberti Design

The following new tools are in the final stages of development and will be available soon.

6″ Sander

Our small 6” disk sanders feature magnetically attached steel disks and PSA sanding disks to enable quick changes of grit sizes. The sander table tilts down 45 degrees and up 12 degrees and can be raised to sand across the edge of your work, or lowered to sand along the edge (with the grain of wood). The sanders now come with a dust collector that can be used with, or without a vacuum. The table mount can accommodate a thickness of about 4”.

A magnetically attached fence is included for fast and accurate adjustment of the steel fence piece.

The sander table is quickly detachable to mount an optional cutting tool rest for very accurate and fast sharpening of chisels, gouges, plane blades of all sizes and many kinds of knives and scrapers. Flat backs on cutting tools are easily honed and restored as necessary. The tool rest is quickly adjusted to support your tools and precisely control the cutting angle. Our optional honing disk will provide a polished razor sharp edge.

Although these sanders are small and portable, they retain a large and versatile capacity for musical instrument making and restoration. Sized for violin and viola sized instruments, they can handle soundposts, fingerboard ends, nuts, saddles, corner and end blocks, neck resetting, and anything else that needs precise control of angle and size.

Our sanders are also especially well-suited to bow making and are in use by countless bowmakers around the world. They are well known to provide fast an accurate assistance in all components of bow frogs, as well as fitting and trimming tip plates and quick sharpening of bowmakers knives and scrapers.

Bridge Foot Sander

Although our original prototype bridge foot sander has been in daily use in a world class violin shop for over 25 years now, based on suggestions from other recent field testing we have done a small bit of redesign and finally put it onto production. This tool will add much in efficiency and accuracy to the fitting of all bridge feet for violin, viola, and cello. The back face angle of is fully adjustable for violin, viola and cello. Eight different radiused sanding plates allow the foot arch to be finished after graphite marking on the instrument with only a few passes of a scraper. New employees can be trained in minutes to properly fit a bridge.


Mini Cut-Off Saw Fence

These have been in use in a few select violin shops for about thirty years and we have now made a design revision that is a major improvement to our replacement table. The saws are available from many sources world-wide. We have designed a replacement miter table suitable for soundpost cutting, peg cut-off, nuts, saddles, and countless other uses in violin and bow making. This is another tool that when equipped with our miter table you will find essential to your work flow and efficiency.

Peg End Rounder

Our peg end rounding tool has now been in use for over two years in high volume restoration and repair shops and has proven to be a high value time saver. We will now be shipping all new production with solid carbide blades that have multiple cutting edges. The new blades will eliminate sharpening and further the return on your investment. End rounding, even of Wittner plastic pegs, is reduced to a few seconds per peg and provides a polished surface.

IMAGE COMING SOON

New 9” Hand-Cranked Disk Sander

We have followed the proven design of our 6” sander with a 9” version that will replace our previous model 9” sander. Although it is based on the 6” sander design principals, the components of the new 9” sander are much more robust. From the main frame to the table mount this sander is a solid industrial quality machine. The table tilts down 60 degrees and up 12 degrees and is of the same thickness and stress relieved construction as the old model. It also retains the 90 degree fine adjustment and fine adjustment of all other angles. Other features and accessories and options are mostly the same as the 6” sander. We are retaining the clamp-on table fence of the old model.

This new sander is somewhat lighter in weight and more portable, but just as robust as the old model.

The savings in complexity, materials, and machining time have allowed a price reduction as well.